The difference between semi-automatic and fully automatic edge banding machines

Carpenter machinery includes many types, such as wrapping machines, laminating machines, etc. Edge banding machines are one of them, which can actively complete the edge banding operation of carpenter's boards. Theoretically, there are straight edge banding machines and curved irregular edge banding machines (portable), but generally, straight edge banding machines are used

In addition, according to the degree of automation, it can be divided into semi-active edge banding machines and fully active edge banding machines. The carpenter's edge banding machine mainly consists of a body, a processing unit, and a control system. The primary difference between semi-active and fully active machines lies in the different processing units. Semi active machines generally only require gluing, edge banding, upper and lower trimming, and polishing; And generally, fully active methods include pre milling, gluing, edge sealing, alignment, rough finishing, precision finishing, contour marking, edge scraping, polishing, and slotting.

Carpenter edge banding machine belongs to the category of solid wood machinery. The edge banding machine is literally used for edge banding. The carpenter edge banding machine highly automates the edge banding process and can complete many procedures such as transportation, gluing, blocking, front and rear alignment, upper and lower trimming, upper and lower precision trimming, upper and lower scraping, polishing, etc.

Carpenter edge banding machine is suitable for straight edge banding and trimming of medium density fiberboard, fine carpenter's board, solid wood board, particleboard, polymer door panel, plywood, etc. It can have double-sided adhesive edge banding, with cutting edge banding, bonding and pressing, leveling, chamfering, rough trimming, fine trimming, scraping edge polishing and other functions in one go. The edge banding is delicate, smooth, and has a good hand feel, and the sealing line is straight and lubricated.

The semi-active edge banding machine is suitable for straight edge banding of medium density fiberboard, particleboard, and particleboard. It is an active production line that can complete the transportation of edge banding boards, strip boards, upper and lower edge trimming, and polishing operations at a relatively low price. The fully active edge banding machine is suitable for straight edge banding of medium density fiberboard, particleboard, solid wood board, particleboard, polymer door panels, and plywood. It is suitable for use by large and medium-sized furniture, cabinets, and other panel furniture manufacturers, and is relatively expensive.

If the manufacturer has a relatively small scale and the edge banding board is only medium density fiberboard or particleboard, then a semi-active edge banding machine can be considered, which is not expensive and saves costs.

In general, if the requirements for edge banding effect are not very high, a semi-active edge banding machine can be chosen. For high-end customized panel furniture edge banding, it is recommended to choose a fully active edge banding machine. Therefore, when choosing, in addition to caring about the quality and price of the edge banding machine, one should also consider their own production needs.