What are the functions of the six function edge banding machine？

The main functions of a six function edge banding machine (although the functions of edge banding machines may usually exceed six, they are interpreted as "six functions" here) usually include the following aspects:

Pre milling:

The pre milling function usually consists of two milling tools at the front and back, used for milling and correcting irregular parts of the edge of the board, such as ripple marks, burrs, etc., to make the bonding between the edge banding and the board more tight, improve overall integrity and aesthetics.

Glue application:

The glue coating system is used to apply melted glue on the side of the workpiece, and then stick the edge tape sent in with the side of the workpiece. This step requires ensuring that the glue is evenly applied to ensure a strong adhesive force.

Compression:

The pressing function is to apply pressure to the edge banding adhered to the board, so as to firmly bond the board and the edge banding together. This is a crucial step in the edge sealing process, which directly affects the quality of the edge sealing.

Qi Tou:

The head alignment function is used to cut off the protruding edge bands at the front and rear ends of the board, making them flush with the board. Through precise linear guide motion and automatic tracking technology of the model, the head alignment device can ensure a smooth and flat cutting surface.

Edge trimming:

The trimming function includes two steps: rough trimming and fine trimming. Rough trimming is mainly used to remove the protruding edge bands on the upper and lower sides of the board, reducing the burden on the finishing knife; And refinement is the process of shaping the edges of the board that are adhered to the top and bottom, milling them into R-curved edges to increase the aesthetic appearance of the board's corners.

Polishing:

The polishing function is to perform photometric treatment on both sides of the trimmed edge banding to make it smoother and neater. Polishing is usually done by a rotating cloth wheel, which can enhance the overall texture and aesthetics of the board.

It should be noted that different brands and models of six function edge banding machines may have differences in specific functions and configurations. Therefore, in actual purchase and use, it is recommended to carefully read the product manual or consult professionals for more accurate information.

In addition, although the above functions are classified as "six functions", in reality, the functions of the edge banding machine may be more diverse, including additional functions such as contour tracking, scraping, cleaning, pneumatic knife adjustment, automatic lifting, and automatic refueling. These functions can further improve the efficiency and quality of edge banding, meeting the needs of different users.