Introduction to the functions and precautions of a fully automatic edge banding machine for furnitur

The fully automatic edge banding machine is mainly used for the production of panel furniture and wooden doors, and has a very important effect on various wooden furniture, wooden doors and other products. The functions include pre milling, gluing, alignment, rough trimming, fine trimming, edge scraping, contour marking, polishing, slotting, etc. It is a good helper for the production of wooden products.

Pre milling: Use double milling cutters to re polish the ripple marks, burrs, or non perpendicular phenomena caused by the cutting saw/cutting saw after processing, in order to achieve better edge sealing effect. Make the bonding between the edge banding and the board more tight, with better overall integrity and aesthetics.

Glued edge sealing: Through a special structure, the edge sealing board and edge sealing material are evenly coated on both sides, ensuring a stronger adhesive force.

Qi Tou: Through precise linear guide motion, the active marking of the model and the fast cutting structure of the high-frequency high-speed motor are selected to ensure a flat and smooth cutting surface.

Rough and fine trimming: Both use active marking with a template and high-frequency high-speed motor structure to ensure the flatness and smoothness of the upper and lower parts of the trimmed board. Used to remove the remaining edge sealing materials on the upper and lower edges of the processed board edge banding. The rough knife is a flat knife. In order to deal with the remaining part of the veneer during the sealing process. Because when sealing the veneer, it is not possible to directly use a finishing knife R-shaped knife. The veneer is generally 0.4mm thick, and if a finishing knife is used directly, it may easily cause cracking. In addition, rough repair can also be used to seal PVC and acrylic. Click on the document link to check more information. Click on the document link to check more information, which is the first level repair process. The precision knife is an R-shaped knife. Mainly used for PVC and acrylic edge banding of panel furniture, with edge banding thicker than 0.8mm being preferred.

Imitation tracking: rounding equipment can make the end face of the board smoother and more beautiful;

Scraping edge: used to eliminate the ripple marks caused by the cutting process of non-linear edge trimming, making the upper and lower parts of the board smoother and neater;

Polishing: Use a cotton polishing wheel to sort and process the finished board, and polish it to make the edge sealing surface smoother.

Slotting: Used for directly slotting wardrobe side panels, bottom panels, etc., reducing the process of sawing and making it more convenient and efficient; It can also be used for slotting aluminum edges on door panels.

Maintenance precautions:

1. The first thing to do is to perform regular maintenance on the edge banding machine. Generally, the maintenance cycle of the edge banding machine is around 20 days. It is important to record in detail the wear environment of the bearings, gears, preferred bodies, and other departments during the maintenance process.

2. After the edge banding machine is finished, it needs to be sorted out to prevent blockages that may occur during the work process.

3. Regularly lubricate the edge banding machine, and when selecting lubricating oil, pay attention to selecting high-quality ones.

4. After using the edge banding machine for a period of time, the parts of each part should be inspected, and if there is any looseness, it should be dealt with in a timely manner. The protection and maintenance of the edge banding machine play a crucial role in its operation. Therefore, when using the edge banding machine in daily life, do not forget to perform regular maintenance on it.