Woodworking CNC Router usage precautions

1. After determining the carving position, the X, Y, and Z axis workpiece coordinates must all be set to "0".

2. Adjust the carving speed and spindle motor speed to prevent cutting from breaking due to excessive speed or slow speed during carving.

3. When automatic knife alignment, it is important to note that the knife alignment block must be insulated from the aluminum tabletop of the engraving machine.

4. When carving, if you are unsure about the first cut or afraid of making mistakes, you can slow down the cutting speed and return it to normal when you feel that the carving is normal; You can also simulate carving in the air to see if it works properly.

5. If the woodworking carving machine is not used for a long time, it should be refueled and idle regularly every week, preferably every week, to ensure the flexibility of the transmission system.

6. Require the woodworking carving machine to operate continuously for less than 10 hours per day; Ensure the cleanliness of the cooling water and the normal operation of the water pump, and never cause water shortage in the water-cooled spindle motor. Regularly replace the cooling water to prevent excessive water temperature. Try to use as much circulating water as possible and replace it with a large capacity water tank.

7. After each use of the woodworking carving machine, attention should be paid to cleaning, and the dust on the platform and transmission system must be cleaned thoroughly; Regularly lubricate the X, Y, and Z axes of the transmission system.

8. It is best for operators to wear dust masks and protective goggles when operating the woodworking carving machine to avoid the intrusion of dust and other substances into the human body during processing, which may cause discomfort.

9. The daily maintenance method of the woodworking carving machine should be to add a certain dust-proof and dust removal device to the woodworking carving machine, and choose the dust removal equipment for matching use.