Proper maintenance of the vacuum laminating machine can more effectively extend the life of the mach

In recent years, panel furniture production equipment has developed rapidly. As a key production equipment, the vacuum laminating machine has a good development prospect, but the best machine also needs regular maintenance, so as to make its service life longer.

There are different opinions on the maintenance of the vacuum laminating machine. Any machinery and equipment need to be checked regularly, especially the parts of the vacuum laminating machine. We need to check whether there is any damage regularly. If there is any damage, we must immediately replace with new parts; The cleaning of the machine is also very important. It is not allowed to be surrounded by people during the operation of the machine, let alone put debris on the equipment. This is also a way to prevent the machine from automatically returning to the heating cover to injure people.

The vacuum laminator process is used as a process to protect and decorate the surface of printed matter. Laminating takes a large share in the post-press processing. Just walk into a bookstore and you will find that most books use this method. This is because the surface of the laminated printed matter will be smoother, brighter, stain-resistant, water-resistant, and abrasion-resistant, and the color of the cover of the book and magazine will be more vivid and not easily damaged.

The abrasion resistance, folding resistance, tensile resistance and moisture resistance of printed matter have been greatly strengthened, which protects the appearance and service life of various printed matter. It is worth mentioning that the laminating process of the laminating machine can make up for the quality defects of the printed products to a large extent. Many of the apparent defects that appear during the printing process, after laminating (especially after the matte film), Can be covered.

Everyone should follow the correct methods and procedures when using any product to avoid unnecessary accidents.

First of all, make sure that the rotating parts of the pressing device are not damaged, clean the workbench frequently without dust, and prepare enough necessary items, such as product pads.

The temperature of the film should be adjusted from time to time. When the heating cover is turned on, the press frame must be locked. No objects are allowed on and around the guide rail, and the hands of personnel must be left.

It is strictly forbidden to stand around when the vacuum laminating machine is working. If the machine is found to make abnormal noises, the power should be turned off immediately. Protective items such as covers should not be removed at will. The power should be turned off after the work is finished.